PRODUCTS
- Building sealant
- Structural adhesive
- weather proofing sealant
- Stone sealant
- Special sealant
- Special purpose sealant
- Hollow rubber
- Plastic door and window
- Industrial sealant
CONTACT US
Guangzhou sino-bond State Organic Silicone Material Co., Ltd.
TEL：020-87483899、
FAX：020-87483699
CONTACT：Miss Yang
ADD：Baiyun District of Guangzhou City bell off the town of bamboo red bamboo Road on the 29th
 |
SINO-BOND 666 ACETIC SILICONE SEALANT
DESC:
One part, acetic curing, multipurpose silicone sealant Excellent unprimed adhesion on glass, aluminium, plastics, woods, etc Widely used for glazing and sealing windows, doors, showcases, etc
- FEATURES
- USE
- PARAMETER
- DETAILS
APPLICABLE STANDARDS: GB/T 14683-2003
One part, acetic curing, multipurpose silicone sealant. Excellent unprimed adhesion on glass, aluminium, plastics, woods, etc. Widely used for glazing and sealing windows, doors, showcases, etc.
One part, acetic curing, multipurpose silicone sealant. Excellent unprimed adhesion on glass, aluminium, plastics, woods, etc. Widely used for glazing and sealing windows, doors, showcases, etc.
Glaze and waterproof for Windows •Doors •Shopfronts •Internal fixture and fittings.
LIMITATIONS:
Do not use for structural glazing or fish aquarium assembly. Not recommended for building materials that bleed oils, plasticizers, or solvents–materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets or tapes. Not recommended for use in totally confined spaces as the sealant requires atmospheric moisture for cure. Not recommended for continuous water immersion applications. Not recommended for use on frost-laden or wet surfaces. Not recommended for places where painting of the sealant is required, as the paint film may crack and peel. Do not apply at temperatures below 4°C or above 40°C.
LIMITATIONS:
Do not use for structural glazing or fish aquarium assembly. Not recommended for building materials that bleed oils, plasticizers, or solvents–materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets or tapes. Not recommended for use in totally confined spaces as the sealant requires atmospheric moisture for cure. Not recommended for continuous water immersion applications. Not recommended for use on frost-laden or wet surfaces. Not recommended for places where painting of the sealant is required, as the paint film may crack and peel. Do not apply at temperatures below 4°C or above 40°C.
| Property | Result | Test Method | |
| Appearance | Paste | ||
| Tack-free time, minutes | 12 | GB/T 13477.5 | |
| Extrusion rate, ml/minute | 7 | GB/T 13477.3 | |
| Working Time, minutes | 10-20 | ||
| Flow (sag or slump), mm | Vertical | 0 | GB/T 13477.6 |
| Horizontal | 0 | ||
| Durometer Hardness, Shore A, Points | 20 | GB/T 531 | |
| Tensile Adhesion Strength, MPa | 23℃ | 0.45 | GB/T 13477.8 |
| 90℃ | 0.4 | ||
| －30℃ | 0.5 | ||
| after immersion in water | 0.4 | ||
| tensile properties at maintained extension, % | No damage | GB/T 13477.10 | |
| Thermal Weight Loss, % | 35 | GB/T 13477.19 | |