PRODUCTS
- Building sealant
- Structural adhesive
- weather proofing sealant
- Stone sealant
- Special sealant
- Special purpose sealant
- Hollow rubber
- Plastic door and window
- Industrial sealant
CONTACT US
Guangzhou sino-bond State Organic Silicone Material Co., Ltd.
TEL：020-87483899、
FAX：020-87483699
CONTACT：Miss Yang
ADD：Baiyun District of Guangzhou City bell off the town of bamboo red bamboo Road on the 29th
 |
SINO-BOND 992 INSULATING GLASS SILICONE SEALANT
DESC:
Two-part, neutral curing silicone sealant with high modulus and high strength, specially designed for glazing insulating glass
- FEATURES
- USE
- PARAMETER
- DETAILS
APPLICABLE STANDARD: JC/T 486
Two-part, neutral curing silicone sealant with high modulus and high strength, specially designed for glazing insulating glass. It has the advantage of low air permeability. Sino-bond 992 Insulating Glass Silicone Sealant works with two-part mixing equipment and the two parts react quickly after mingled in scale, then cures to elastomer.
Two-part, neutral curing silicone sealant with high modulus and high strength, specially designed for glazing insulating glass. It has the advantage of low air permeability. Sino-bond 992 Insulating Glass Silicone Sealant works with two-part mixing equipment and the two parts react quickly after mingled in scale, then cures to elastomer.
As a secondary edge adhesive sealant in insulating glass units.
LIMITATIONS:
Not recommended for building materials that bleed oils, plasticizers, or solvents–materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets or tapes. Not recommended for use in totally confined spaces as the sealant requires atmospheric moisture for cure. Not recommended for continuous water immersion applications. Not recommended for use on frost-laden or wet surfaces. Not recommended for places where painting of the sealant is required, as the paint film may crack and peel. Do not apply at temperatures below 4°C or above 40°C.
LIMITATIONS:
Not recommended for building materials that bleed oils, plasticizers, or solvents–materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets or tapes. Not recommended for use in totally confined spaces as the sealant requires atmospheric moisture for cure. Not recommended for continuous water immersion applications. Not recommended for use on frost-laden or wet surfaces. Not recommended for places where painting of the sealant is required, as the paint film may crack and peel. Do not apply at temperatures below 4°C or above 40°C.
| Property | Result | Test Method | |
| Appearance | Paste | ||
| Tack-free time, minutes | 20 | GB/T 13477.5 | |
| Working Time, minutes | 10-30 | ||
| Flow (sag or slump), mm | Vertical | 0 | GB/T 13477.6 |
| Horizontal | 0 | ||
| Durometer Hardness, Shore A, Points | 40 | GB/T 531 | |
| Tensile Adhesion Strength, MPa | 23℃ | 0.96 | GB/T 13477.8 |
| 90℃ | 0.78 | ||
| －30℃ | 1.21 | ||
| after immersion in water | 0.90 | ||
| tensile properties at maintained extension, % | No damage | GB/T 13477.10 | |
| Thermal Weight Loss, % | 2.50 | GB/T 13477.19 | |