PRODUCTS
- Building sealant
- Structural adhesive
- weather proofing sealant
- Stone sealant
- Special sealant
- Special purpose sealant
- Hollow rubber
- Plastic door and window
- Industrial sealant
CONTACT US
Guangzhou sino-bond State Organic Silicone Material Co., Ltd.
TEL:020-87483899、
FAX:020-87483699
CONTACT:Miss Yang
ADD:Baiyun District of Guangzhou City bell off the town of bamboo red bamboo Road on the 29th
SINO-BOND 858 SILICONE FLAME RETARDANT SEALANT
DESC:
One part, neutral curing silicone sealant specially developed for flame retardant sealing The Fire Retardant Grade meets FV-0(GB T 2408), the Fire Resistant Grade meets First Grade(GA 161)
- FEATURES
- USE
- PARAMETER
- DETAILS
APPLICABLE STANDARDS: SR-12.5E-0-JC/T885,ISO11600-F-12.5E,ASTM C 920-05 Class 12.5
One part, neutral curing silicone sealant specially developed for flame retardant sealing. The Fire Retardant Grade meets FV-0(GB/T 2408), the Fire Resistant Grade meets First Grade(GA 161). Excellent unprimed adhesion on most building materials. Remains flexible over a temperature range of -58°F (-50°C) to 302°F (150°C).
One part, neutral curing silicone sealant specially developed for flame retardant sealing. The Fire Retardant Grade meets FV-0(GB/T 2408), the Fire Resistant Grade meets First Grade(GA 161). Excellent unprimed adhesion on most building materials. Remains flexible over a temperature range of -58°F (-50°C) to 302°F (150°C).
Flame-resistant waterproof and moisture-proof sealing for hotel, theatre and other public places; Glazing for all kinds of flame-resistant windows and doors; Flame-resistant sealing for curtain wall; All building and glazing joints which require a fire rating; Fire rated expansion joints; Flam- resistant sealing for electronic installation; Many other industrial uses.
LIMITATIONS:
Do not use for structural glazing or fish aquarium assembly. Not recommended for building materials that bleed oils, plasticizers, or solvents–materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets or tapes. Not recommended for use in totally confined spaces as the sealant requires atmospheric moisture for cure. Not recommended for continuous water immersion applications. Not recommended for use on frost-laden or wet surfaces. Not recommended for places where painting of the sealant is required, as the paint film may crack and peel. Do not apply at temperatures below 4°C or above 40°C.
LIMITATIONS:
Do not use for structural glazing or fish aquarium assembly. Not recommended for building materials that bleed oils, plasticizers, or solvents–materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets or tapes. Not recommended for use in totally confined spaces as the sealant requires atmospheric moisture for cure. Not recommended for continuous water immersion applications. Not recommended for use on frost-laden or wet surfaces. Not recommended for places where painting of the sealant is required, as the paint film may crack and peel. Do not apply at temperatures below 4°C or above 40°C.
Property | Result | Test Method | |
Appearance | Paste | ||
Tack-free time, minutes | 25 | GB/T 13477.5 | |
Extrusion rate, ml/minute | 7 | GB/T 13477.3 | |
Working Time, minutes | 10-20 | ||
Flow (sag or slump), mm | Vertical | 0 | GB/T 13477.6 |
Horizontal | 0 | ||
Durometer Hardness, Shore A, Points | 45 | GB/T 531 | |
Tensile Adhesion Strength, MPa | 23℃ | 0.92 | GB/T 13477.8 |
90℃ | 0.86 | ||
-30℃ | 0.96 | ||
after immersion in water | 0.77 | ||
tensile properties at maintained extension, % | No damage | GB/T 13477.10 | |
Thermal Weight Loss, % | 2 | GB/T 13477.19 |