APPLICABLE STANDARD: JC/T485
One part, neutral curing, general purpose construction silicone sealant with excellent adhesion on most common building materials, specially developed for sealing in all types of doors, windows and wall joints.

Glazing and weatherproofing for doors and windows. Weather sealing in joints.
LIMITATIONS:
Do not use for structural glazing. Not recommended for building materials that bleed oils, plasticizers, or solvents–materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets or tapes. Not recommended for use in totally confined spaces as the sealant requires atmospheric moisture for cure. Not recommended for continuous water immersion applications. Not recommended for use on frost-laden or wet surfaces. Not recommended for places where painting of the sealant is required, as the paint film may crack and peel. Do not apply at temperatures below 4°C or above 40°C.

Property		Result	Test Method
Appearance		Paste
Tack-free time, minutes		10	GB/T 13477.5
Extrusion rate, ml/minute		8	GB/T 13477.3
Working Time, minutes		10-20
Flow (sag or slump), mm	Vertical	0	GB/T 13477.6
	Horizontal	0
Durometer Hardness, Shore A, Points		45	GB/T 531
Tensile Adhesion Strength, MPa	23℃	0.85	GB/T 13477.8
	90℃	0.76
	－30℃	0.92
	after immersion in water	0.78
tensile properties at maintained extension, %		No damage	GB/T 13477.10
Thermal Weight Loss, %		8	GB/T 13477.19